trying to virtualize raspberry

What changes do you expect? AFAIK it will convert resultingimage.hdd to directory resultingimage.hdd,
contained resultingimage.hdd(empty file), resultingimage.hdd.0.{5fbaabe3-6958-40ff-92a7-860e329aab41}.hds(actual plain disk image); DiskDescriptor.xml(virtual disk descrition).
Then you can attach these hdd bundle to any VM as virtual HDD.
Note that this image must a valid MBR with loader to be able to boot from.
 
Could you genarate problem a report data at the moment when it couldn't boot and share its ID here?
Thank you.
 
here my report problem number: 55551797

here my screen when I try to boot.
Immagine_di_Parallels.png
 
At first I would suggest to change virtual HDD from SATA to IDE and remove all devices except virtual HDD.
Does this image work on a bare hardware? What bootloader is used there?
Looks like there is no bootloader.
 
ok done. nothing change.
yes on my raspberry it boot ok.
I don't know the bootloader version: I install Debian Wheezy Raspbian
how can I discover the information you need for help me?

can be also wrong command to obtain the image?
dd if=/dev/mmcblk0 of=/media/USB1/ResultingImage.hdd bs=65536
 
"yes on my raspberry it boot ok."
Do you mean raspberry board?
This file 'kernel.img' resides on the first partition of an
Raspbian image downloaded from http://www.raspberrypi.org/downloads/
and this is 'file' command output:
file kernel.img
kernel.img: Linux kernel ARM boot executable zImage (little-endian)
Also raspberry is an ARM project.
So, parallels won't help you there. You need an ARM emulator. Sorry.
 
You must log in or register to reply here.
Back
Top