Performance problems in Windows 10 after upgrade to v14

D

DellW

Bit poster
Hi y'all

I've upgraded to Parallels 14 and ensured that Parallels Tools has updated in my Windows 10 guest VM. Ever since the upgrade, I'm experiencing severe performance problems in my windows 10 VM such that it is essentially unusable. The CPU usage is spiking to 100%, but by the time I'm able to bring up the Task Manager, it goes back to normal. However, almost nothing in IE is useable. Is there anything I can do to diagnose this problem?

Thanks
Dell
Madison, AL
 
DellW said:
Hi y'all

I've upgraded to Parallels 14 and ensured that Parallels Tools has updated in my Windows 10 guest VM. Ever since the upgrade, I'm experiencing severe performance problems in my windows 10 VM such that it is essentially unusable. The CPU usage is spiking to 100%, but by the time I'm able to bring up the Task Manager, it goes back to normal. However, almost nothing in IE is useable. Is there anything I can do to diagnose this problem?

Thanks
Dell
Madison, AL
Click to expand...
Hi @DellW, can you please send us a technical report collected when you notice high CPU usage, via Windows 10 menu bar > Help > Send Technical Data...
Please post the report ID here, I will take a look.
 
MarkB24 said:
Exact same issue on my MBPr Mid-2015 10.13.6. I upgraded to v14 a few days ago and since then my W10 VM has been almost unusable due to CPU consistently topping 100%. Initially thought the issue may be Chrome however it seems to happen with even something as simple as Outlook opening.
Running dual monitors with a dedicated W10 monitor, when it spikes it ends up effecting the Mac also so I've had to stop using Windows altogether until this can be diagnosed (Not awesome as the standalone Mac in a Windows based company).

I've uploaded my report to 272967475
Click to expand...
Thank you very much, @MarkB24, but please we need a report while the VM is working and experiencing the issue, so required performance counters for CPU will be collected. In your report VM is stopped, plus you have two Win10 VMs, not sure which one has this issue. Or do they both have?
 
Hi, I have very similar problems, and it started right after the upgrade to 14. I can start the Win10 VM but logging on takes minutes now, sometimes it does not work at all and I have to trigger a hard VM stop. When the VM is finally up and running, the CPU load on my MacBook Pro (2016, 2.7GHz I7, 16GB) goes over 100%, and many apps freeze, including the native macOS apps. Wish I could go back to pre14. Any idea how to fix these problems? Happy to provide all data needed to get this done. Regards, Roland
 
RolandW1 said:
Hi, I have very similar problems, and it started right after the upgrade to 14. I can start the Win10 VM but logging on takes minutes now, sometimes it does not work at all and I have to trigger a hard VM stop. When the VM is finally up and running, the CPU load on my MacBook Pro (2016, 2.7GHz I7, 16GB) goes over 100%, and many apps freeze, including the native macOS apps. Wish I could go back to pre14. Any idea how to fix these problems? Happy to provide all data needed to get this done. Regards, Roland
Click to expand...
Hi @RolandW1, let's start from collecting technical data report when CPU usage is high. Go to Help menu > Send Technical Data...
Please post the report ID here, I will take a look. Thank you.
 
Hello, I'm going through the exact same problema. Just sent technical data: Report id 273343814
The situation is unsustainable, can we rollback to version 13 until the issue is resolved?
 
GuilhermeT said:
Hello, I'm going through the exact same problema. Just sent technical data: Report id 273343814
The situation is unsustainable, can we rollback to version 13 until the issue is resolved?
Click to expand...
Hi @GuilhermeT, thank you for the report. CPU usage spikes are directly related to Windows programs using CPU. Parallels Desktop itself does not use CPU nearly at all.
So, before upgrading to PD14 you had no CPU spikes at all? How frequent they are now?
 
Hi,

Yes, they happened, but only when there was actually something running that was CPU intensive, and It would not freeze the machine, just make things slower. Now, it happens even when I ctrl+tab to change application, and it freezes the hole system making it unusable.

att,
 
Also upgraded to v14, CPU running constantly >150% and internet speed dropped from >800 mb/s to <2mb/s. On the mac side speed still normal. something seems to be running in a massive loop.
 
AFC said:
Also upgraded to v14, CPU running constantly >150% and internet speed dropped from >800 mb/s to <2mb/s. On the mac side speed still normal. something seems to be running in a massive loop.
Click to expand...
Thanks, i just missed that point of upgrading now I will do the same. Cheers!
 
I am in the same boat. I use a Windows 10 vm for work. After upgrading, the same programs are logging almost 100% CPU usage when this wasn't the case before upgrading to v14. I can tell without a doubt the upgrade made this change. Even clicking on a button within firefox is delayed a few seconds, or typing takes a while to catch up. I created my own thread and uploaded my logs, although CPU usage was fine at the time of the log capture. Hoping this can be narrowed down as it totally seems like an issue with something running in Parallels. I thought it was the display memory not being adequate.

273081265 is my technical report #. Coherence mode seems to be getting more delayed now as well.
 
Hello all,

same here, but even scarier... it slows down and after a couple of minutes crashes my whole Mac and I get a black screen of death. Now that I downgraded to v13 everything is fine again.

Best regards,
Oliver
 
OliverS9 said:
Hello all,

same here, but even scarier... it slows down and after a couple of minutes crashes my whole Mac and I get a black screen of death. Now that I downgraded to v13 everything is fine again.

Best regards,
Oliver
Click to expand...

How did you downgrade? I didn't know It was supported by Parallels.
 
I downgraded this morning to Parallels 13 and immediately saw improvement in the clicking functionality (delayed click is gone) and speed improvements in my VM.
 
You must log in or register to reply here.
Back
Top