Parallels Desktop for Mac build 3036 Beta is available for download.

Status
Not open for further replies.
ryanyogi said:
Why do I have to reactivate Windows each time that I boot from boot camp into VM or just run boot camp natively? Why all the hassle?
Click to expand...

Sounds like you are not using the latest beta? These problems should be gone!
 
Windows security update KB890859?

Wants to run every time I boot into Parallels. If I run it, it comes back again the next day and wants to be run again and rebooted. This is using a Boot Camp installation of XP SP2 fully patched. Has anybody else noticed this?
 
Try discrete download

snodman said:
Wants to run every time I boot into Parallels. If I run it, it comes back again the next day and wants to be run again and rebooted. This is using a Boot Camp installation of XP SP2 fully patched. Has anybody else noticed this?
Click to expand...

This happened to me as well. I got it to go away by downloading the update by itself (not the automatic update). It came back when I upgraded to 3036, installed manually again, and it has gone away again. Very strange...
 
bootcamp will no longer boot

installed the 3036 beta on fully patched 10.4.8
then after installing the parallels tools - Parallels-Tools-Bcp-1.0.3-Win.exe on a fully patched sp2 xp pro install....

I can run windows through parallels but when i try to boot directly into windows via bootcamp the screen hangs on the "please select the operating system to start:" window and I have no keyboard control to let me select either microsoft windows xp professional or parallels configuration. And the screen just hangs here - it doesn't eventually continue on to the bootup.

any suggestions?
 
Network - Outlook loses network mapped drive connection

I am using Outlook in my VM to connect to my PC that hosts my email via a share. What I am finding is that Outlook loses the ability to open the mapped drive or loses the connection to the email folders. And yes, it is reconnect at startup is selected.

I am playing with keeping the folder open for the mapped drive t see if this helps keep open the connection and it seems to b working.

I have no issues when accessing the data folders, but Outlook in the VM after a few minutes, I am guessing standby or background mode, loses the connection state. Close Outlook and open it and all is well.

Obviously this can produce a corrupted email file.

And of course the iSight issue as documented, I would agree it is lit up, but not sending video.

MG
 
PPC locks up whole system

OK.. another BIG one..

I am trying to get my PPC 6700 phone to use ActiveSync 4.2 with Outlook 2003. It shows up on the list but no action in the VM other than it locks up the VM and my whole MacBook Pro.

Outlook was not loaded, I knew better from my last post.

I need to remove the batteries to recover... So REALLY hurts when I do that... so after trying it 2 times.... "Don't do that" seems prudent. ;-)

So similar I am guessing to the iSight issue.

Please fix this one...

Thanks.

MG
[email protected]
 
lwhitten said:
This happened to me as well. I got it to go away by downloading the update by itself (not the automatic update). It came back when I upgraded to 3036, installed manually again, and it has gone away again. Very strange...
Click to expand...
It finally went away for me as well. I agree, very strange..... At least everything else has been working swimmingly for me. No stability problems at all.
 
The problem was the CD connection

snodman said:
Wants to run every time I boot into Parallels. If I run it, it comes back again the next day and wants to be run again and rebooted. This is using a Boot Camp installation of XP SP2 fully patched. Has anybody else noticed this?
Click to expand...
Similar issue here. Each time restoring VM from suspended state, it invited me to unload Parallels tools. I found that the CD/DVD-ROM 1 had attached itself to an iso file (on OS X) and was mounting, then executing in the VM each time the VM was restored. The solution was to disconnect the CD drive in Parallels and re-connect it to Default CD/DVD ROM where it used to be. I'm suspecting that I suspended Parallels when the iso file was mounted and it wouldn't forget it. I had troubles with a USB card reader that needed a force quit so maybe that was the cause of the problem. Anyway, the solution was to disconnect the CD in Parallels from the iso file.
 
SteveDemy said:
Similar issue here. Each time restoring VM from suspended state, it invited me to unload Parallels tools. I found that the CD/DVD-ROM 1 had attached itself to an iso file (on OS X) and was mounting, then executing in the VM each time the VM was restored. The solution was to disconnect the CD drive in Parallels and re-connect it to Default CD/DVD ROM where it used to be. I'm suspecting that I suspended Parallels when the iso file was mounted and it wouldn't forget it. I had troubles with a USB card reader that needed a force quit so maybe that was the cause of the problem. Anyway, the solution was to disconnect the CD in Parallels from the iso file.
Click to expand...
Well, the "Groundhog Day" issue of the same XP patch getting pushed to my BootCamp installation each new day when accessed through Parallels came back for me the past couple of days. I have tried what you recommended and will let you know if it fixes it for me tomorrow.
 
RC 3036 - USB Printer problems

Hi. I'm having problems getting an Epson R340 printer to work. The printer is found and I can run through the Epson install utility. At best I seem to be able to get the printer to print once, right after running the installer. After that all print jobs hang in the print queue. I used printer driver v5.5aA, the latest available on the Epson site. Any suggestions on resolving this?
 
diamondsw said:
Unlikely - you need root privileges to unmount the drive, which needs to be done before Parallels can safely start playing with it.

However, they've surprised me before. :)
Click to expand...

A standard user can mount and unmount drives.

This will be unfortunate for a corporate environment were the computers are locked down, and they are setup so users do not have Admin Access, i hope there is a way around this.
 
Beta Release 3150 Still Has Parallels Tools Crash Problem

I installed Beta Release 3150, received the tools not compatible message, and then BAD POOL HEADER problem I reported back in December.

The work around is boot up in Safe Mode with Networking (Hit Apple-F8 immediately during Windows Boot) and install the Parallels Tools while in Safe Mode.

Once up and running, I've only had one unexplained crash in 40 days of usage. Kind of typical for Windows..

Enjoy!
 
Transport Image to Boot Camp?

Overall, THIS BETA IS SOLID!!! I'm glad to own a full license and support continued development of this fantastic product. I mean come on, Coherence.... Such a GREAT thing! Now I can run the already purchased copy of Office and don't have to bend over for Bill again. :eek:

errandwolfe said:
Now that we have the ability to boot a physical partition, is there any way to convert an existing VM machine to a physical partition or do you basically have to start over from scratch?
Click to expand...

So, is this possible? Image Transporter doesn't seem to do the trick. I haven't tried BartPE or ebcd yet, but why make it that much effort.... :cool:
 
Now that we have the ability to boot a physical partition, is there any way to convert an existing VM machine to a physical partition or do you basically have to start over from scratch?
Click to expand...

I would really like to know this, too.
 
timsmyname said:
installed the 3036 beta on fully patched 10.4.8
then after installing the parallels tools - Parallels-Tools-Bcp-1.0.3-Win.exe on a fully patched sp2 xp pro install....

I can run windows through parallels but when i try to boot directly into windows via bootcamp the screen hangs on the "please select the operating system to start:" window and I have no keyboard control to let me select either microsoft windows xp professional or parallels configuration. And the screen just hangs here - it doesn't eventually continue on to the bootup.

any suggestions?
Click to expand...
I have the same problem. The keyboard on a MacBook Pro doesn't appear to supply the cursor keys to navigate. I adjusted the boot.ini file to have a 30 second time out, so that the original bootcamp partition is launched. Unfortunately it continues to a repair screen where again I have no keyboard control. I don't know enough about boot.ini to attempt anything else :(
 
Tools Intallation Problems

For some reason once I installed the new version, I haven't been able to install parallels tools. I uninstalled tools and when I go to actions/install parallels tools, no dialog pops up to continue with the installation. Though the option from the main menu goes from the above to actions/cancel installation of parallels tools. Is the installation in the background and does it take awhile or something? Are there alternative ways to install it? Without tools installed, once I go inside the virtual machine interface with my mouse, I can't escape it however.

Any assistance would be greatly appreciated.

Thanks,

Chris
 
USB 2.0 support

I've just installed the latest beta but now my external hardrives and mp3 player are no longer connecting properly. Any assistance will be greatly appreciated.
 
The current release is build 3186, it's not a beta and that's the one you should be using. It's the one you get if you go to the main download link at the top of the page.
 
Status
Not open for further replies.
Back
Top