Parallels 15 sometimes freezes host system, sometimes won't start on mojave

RossK2

Bit poster
I am running Parallels Desktop for Mac version 15.0.0-46967 on macOS 10.14.6 (mojave).
I have two guests installed: Windows 10 and Ubuntu 18.04, both with the latest parallels tools.
My iMac is the 27-inch, Late 2013 model with an SSD installed in place of the original fusion drive.

When parallels starts, it does one of three things:
  • Causes my iMac to hang while showing the spinning beachball/pinwheel and being completely unresponsive aside from mouse movement.
  • Gets stuck on the parallels splash screen, never showing the control center window.
  • Gets stuck starting one of the guests (it doesn't seem matter whether it's the Windows or Ubuntu guest).
I have tried:
  • Uninstalling and reinstalling parallels
  • Running Disk First Aid (this shows no issues, and my hard drive is quite new).
  • Running the Apple diagnostic tool (this shows a System Management Controller issue, but this seems unrelated according to https://support.apple.com/en-gb/HT201295).
  • Switching my guest to the Apple hypervisor.
  • Restarting my mac and removing the power cable for a few minutes, then replacing my power cable and trying again.
Occasionally after uninstalling and reinstalling, parallels will work for a few days with no issues before hitting this problem again.
I notice that the process 'prl_disp_service' is often stuck at 100% CPU at times when the system hangs.
I run ESET antivirus, but have disabled the firewall feature to ensure there are no issues connecting with prl_disp_service.
My iMac often stays in standby for hours at a time with parallels running, but the issues frequently happen after a clean reboot.
I have attached my parallels.log for your reference.

These issues have cost me a lot of time and energy. How can I get parallels working properly on my mac?
 

Attachments

Same problem, been using parallels since V9. Ever since upgrading to 15 it crashes, usually every couple of days, most often on Chrome or Outlook, most recently with word. When I try to restart Parallels it freezes the Mac OS.
I have to restart the mac several time and wait 5 or so minutes for windows to sort itself out. I tried downloading to v14 and its ok but does not integrate well with the new versions.
If this is not fixed soon, I am going back to bootcamp and removing parallels. This has wasted far too much of my time.
 
Same problem, been using parallels since V9. Ever since upgrading to 15 it crashes, usually every couple of days, most often on Chrome or Outlook, most recently with word. When I try to restart Parallels it freezes the Mac OS.
I have to restart the mac several time and wait 5 or so minutes for windows to sort itself out. I tried downloading to v14 and its ok but does not integrate well with the new versions.
If this is not fixed soon, I am going back to bootcamp and removing parallels. This has wasted far too much of my time.
If you decide to investigate this issue, please collect the tech report once the issue reproduced and post the report's ID here.
Thanks in advance.
 
Sending a new sample of code after I started parallels everything jammed again. You should look into it seriously since it may take a long time before it gets back to normal. Lots of time lost here... Processor was at 196% for a long while.
 

Attachments

It was such a pain to use parallels, with all the issues described in these posts, and parallels not giving a shit about it, that i switched to a windows notebook and won't extend my parallels licences. In all these years, parallels was always a bumpy ride and it started to go down the drain when they came up with launching a new major release each year instead of fixing the underlying issues once and forever. Sorry parallels, but you did put revenue before your users, so I am out now.
 
I concur, why can't these companies test their product before releasing it, instead their advise is reinstall the system, oh you did that, then send a crash report. How is mine different from the 60 others here with the same problem.
I'm sat waiting for another disk check while starting parallels because it crashed again. This happens on average every other day and at least 20 minutes to fix each time. I will not be renewing, going back to bootcamp, at least that is stable.
 
Ok, new to the forum and thought I would share my experiences of client's systems from the past years.

I have seen MacOS randomly 'pull' all the memory away from Parallels, I have seen this since about 4 years ago.
It usually took only about a minute to right itself, but it was disturbing enough for me to start warning my clients on Mac that it would probably happen. Since then I have seen it happen on about 70-80% of the macs my clients use with Parallels.

If the Mac isn't assigning a ton of memory to the VM and the Mac is going slow, then there is an issue on the Mac side of things (as windows should be insulated from the system resources by being in a vm).

I suspect some kind of allocationing issue where Mac see's the vm as not needing any ram, then when all memory is pulled from parallels it is automatically pushed onto using the MacOS page files which will slow everything down. If parallels is using swift or any other 'high' level language I would recommend moving to a lower level programming language then manually allocating the ram, BUT this may not work, we are relying on MacOS to do the right thing.
 
I've been seeing this problem for a while. It used to work amazingly, I used Parallels as a demo to show how fast Windows10 is on Mac. I did two things that seem to have triggered this hang issue - 1) added a password to my windows account, and installed a 3rd party VPN (pulse secure) and AV software (Bitdefender). I can't say 100% if these changes are what made Parallels hang every time I use windows, but it's so bad now, I'm got to do a fresh windows install.
 
Hi ParallelsU398,
Unless you told windows to use a network server for passwordsv or something similar (active directory etc.) then that shouldn't do anything, the VPN may cause a network issue, but that should still be 'contained' within the VM and not affect the Mac side of things, however MacOS networking is notoriously shoddy so maybe they open up the core functionality to software and it could interfere through the vm.
Bitdefender may affect parallels as it will try to find out if you have a bios virus amongst other things.

None of these issues should affect the MacOS side of things though, if you get the problems on that side like the OP, then I don't know if a fresh windows install will help.
 
same here:
found this today:
/usr/local/bin/prl_disk_tool --help
it has problems with dylib, because the developer used multiple times binding to the same dylib!!!
just this is crashing TEAM take care before you publish such an update.

At Moment nothing works here, also Catalina crashes after start Parallllllells
MacBook Pro i7 16GM Memory
 
it is terrible! What have you done with my Mac, now also Version 14 form download today will crash my system!!
HDD test are all ok, after restart , after uninstall (move to bin) my Mac works as normal, but just with Parallels installed and doing nothing
my Mac crashes, no not crashing running with multiple hand breaks!

DO YOU HAVE ANYWHERE AN COMPLETE UNINSTALLER ???
 
Are u damn serious? No, really! Exactly the same here. Bought Pro subscription and upgraded to version 15. No my Mac started to freeze randomly when I use Parallels... Do something!
 
same problem here, I am on Catalina 10.15.4 and Parallels 15. I have a MacBook Pro 16 i9 32gb.

I am tired of using parallels, I tried everything written here, didn't help...
Could you please try switching to Apple Hypervisor. I changed it recently and it is very smooth so far.

Configure -> Hardware -> CPU & Memory -> Advanced Settings -> Hypervisor

I read about it in other thread.
https://forum.parallels.com/threads/parallels-hypervisor-vs-apples-hypervisor.337755/page-2
 
Running /usr/local/bin/prl_disk_tool --help returns the following results for me:
objc[49184]: Class MethodInfo is implemented in both /Applications/Parallels Desktop.app/Contents/Frameworks/libPrlXmlModel.1.dylib (0x10f629918) and /Applications/Parallels Desktop.app/Contents/MacOS/prl_disk_tool (0x10e81c7d0). One of the two will be used. Which one is undefined.

objc[49184]: Class DeallocHook is implemented in both /Applications/Parallels Desktop.app/Contents/Frameworks/libPrlXmlModel.1.dylib (0x10f629940) and /Applications/Parallels Desktop.app/Contents/MacOS/prl_disk_tool (0x10e81c7f8). One of the two will be used. Which one is undefined.
 
Back
Top