Install Cisco Anyconnect ARM64 version on Windows ARM VM

Dennis16 said:
hi ，if possible can anyone share the rebuild package for ARM version，my company's it can't do this
Click to expand...
Likely your company's IT has access to Cisco VPN Downloads. The build 4.10.01075 should work out of the box.
I'm a bit paranoic, but using VPN from unknown source can be dangerous
 
After several anyconnect installation that weren't make VA for vpn, I tried to install Anyconnect for ARM, but it said to me it is 64bit WIN WTF?
 

Attachments

  • Screenshot 2022-02-17 at 12.15.01.png
    Screenshot 2022-02-17 at 12.15.01.png
    188.3 KB · Views: 83
Elric said:
Likely your company's IT has access to Cisco VPN Downloads. The build 4.10.01075 should work out of the box.
I'm a bit paranoic, but using VPN from unknown source can be dangerous
Click to expand...
but you cant give the file , because i cant download so wer are a lot of people with this problem we need your support plz
 
Hola, Tengo el mismo problema, me he leido todos los comentarios y lo que no he podido hacer es conseguir las versiones de windows y del cisco que mencionan, pero ademas de eso, la pregunta es.
en mi caso tengo una mac, y en parallel se instalo windows 11, he instalado el cisco pero tengo el problema del driver. funcionaria esta solucion, veo que solo puedo instalar una version de windows que se arm, y que el cisco tambien sea arm. donde podria conseguir dichas versiones.
 
Hey folks, sorry for the necro post, but I didn't see a better place to add this.

I got AnyConnect 4.10.06079 (ARM64) to install under Parallels on my M2 Macbook Pro with no issue. But, when I try to connect to certain VPN endpoints, it pops up the MOTD followed by an error saying "The AnyConnect package on the secure gateway could not be located."

This has me a bit stumped. Does this mean there is an issue with the client or the server? To me, this sounds to me like the destination doesn't support the newer client, but I haven't been able to determine what the remedy is.

When I connect from the native Mac client (using Cisco Secure/AnyConnect 5.0.01256) the client connects without issue.

Any ideas?

Thanks!
 
Darrin said:
Hey folks, sorry for the necro post, but I didn't see a better place to add this.

I got AnyConnect 4.10.06079 (ARM64) to install under Parallels on my M2 Macbook Pro with no issue. But, when I try to connect to certain VPN endpoints, it pops up the MOTD followed by an error saying "The AnyConnect package on the secure gateway could not be located."

This has me a bit stumped. Does this mean there is an issue with the client or the server? To me, this sounds to me like the destination doesn't support the newer client, but I haven't been able to determine what the remedy is.

When I connect from the native Mac client (using Cisco Secure/AnyConnect 5.0.01256) the client connects without issue.

Any ideas?

Thanks!
Click to expand...

This is server side issue, Please update the server to newest version.
 
hola a todos, he adquirido un mac con procesador ARM y no funciona el Anyconnect, me da error al intentar instalarlo ¿Alguien sabe que puedo hacer?

Muchas gracias.
 
Veronica2 said:
hola a todos, he adquirido un mac con procesador ARM y no funciona el Anyconnect, me da error al intentar instalarlo ¿Alguien sabe que puedo hacer?

Muchas gracias.
Click to expand...
Hello!
In order to proceed with further investigation, kindly provide us with the below information:
1. screenshot of any error message
2. Collect a technical report (right-click Parallels icon in Dock > Help > Send technical data > check "Attach screenshots..." > press Send Report) and send the report's 9-digit ID in a reply.
Thank you!
 
You must log in or register to reply here.
Back
Top