Fedora 36 ARM on M1 Parallels Tools install fails on Error: could not build kernel modules m

Hi team, same issues in
Linux version 5.18.0-kali5-arm64 ([email protected]) (gcc-11 (Debian 11.3.0-3) 11.3.0, GNU ld (GNU Binutils for Debian) 2.38) #1 SMP Debian 5.18.5-1kali5
please see trace below:


parallels@0x-kali-test î‚° ~/Desktop/installer î‚° sudo ./install-cli.sh -i --verbose  âœ"  72  22:25:04
[sudo] password for parallels:
Started installation of Parallels Guest Tools version '17.1.4.51567'
modprobe: FATAL: Module prl_tg not found in directory /lib/modules/5.18.0-kali5-arm64

Tue Jul 19 22:25:21 EDT 2022
Start installation or upgrade of Guest Tools
Installed Guest Tools were not found
Register service to install new Guest Tools
Perform installation into the /usr/lib/parallels-tools directory
make: Entering directory '/usr/lib/parallels-tools/kmods'
awk: cmd. line:1: warning: regexp escape sequence `\#' is not a known regexp operator
Will use compiler CC="cc".
Compiler version "cc (Debian 11.3.0-3) 11.3.0"
cd prl_tg/Toolgate/Guest/Linux/prl_tg && make CC=cc
make[1]: Entering directory '/usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg'
1: /lib/modules/5.18.0-kali5-arm64/build
2: /usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg
3: 20220719
4: 1.10.0
Start compile prl_tg...
make -C /lib/modules/5.18.0-kali5-arm64/build M=/usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg SRCROOT=/usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg CC=cc modules
make[2]: Entering directory '/usr/src/linux-headers-5.18.0-kali5-arm64'
warning: the compiler differs from the one used to build the kernel
The kernel was built by: gcc-11 (Debian 11.3.0-3) 11.3.0
You are using: cc (Debian 11.3.0-3) 11.3.0
1: /lib/modules/5.18.0-kali5-arm64/build
2: /usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg
3: 20220719
4: 1.10.0
CC [M] /usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prltg.o
In file included from /usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prltg.c:23:
/usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prltg_common.h: In function 'tg_out':
/usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prltg_common.h:179:14: warning: assignment to 'long unsigned int' from 'void *' makes integer from pointer without a cast [-Wint-conversion]
179 | port += dev->base_addr;
| ^~
/usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prltg_common.h:183:24: warning: passing argument 2 of 'iowrite64' makes pointer from integer without a cast [-Wint-conversion]
183 | iowrite64(val, port);
| ^~~~
| |
| long unsigned int
In file included from /usr/src/linux-headers-5.18.0-kali5-common/arch/arm64/include/asm/io.h:185,
from /usr/src/linux-headers-5.18.0-kali5-common/include/linux/io.h:13,
from /usr/src/linux-headers-5.18.0-kali5-common/include/linux/irq.h:20,
from /usr/src/linux-headers-5.18.0-kali5-common/include/asm-generic/hardirq.h:17,
from /usr/src/linux-headers-5.18.0-kali5-common/arch/arm64/include/asm/hardirq.h:17,
from /usr/src/linux-headers-5.18.0-kali5-common/include/linux/hardirq.h:11,
from /usr/src/linux-headers-5.18.0-kali5-common/include/linux/interrupt.h:11,
from /usr/src/linux-headers-5.18.0-kali5-common/include/linux/pci.h:38,
from /usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prltg.c:7:
/usr/src/linux-headers-5.18.0-kali5-common/include/asm-generic/io.h:769:64: note: expected 'volatile void *' but argument is of type 'long unsigned int'
769 | static inline void iowrite64(u64 value, volatile void __iomem *addr)
| ~~~~~~~~~~~~~~~~~~~~~~~^~~~
/usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prltg.c: In function 'prl_tg_initialize':
/usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prltg.c:385:14: error: implicit declaration of function 'pci_set_dma_mask' [-Werror=implicit-function-declaration]
385 | rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
| ^~~~~~~~~~~~~~~~
In file included from /usr/src/linux-headers-5.18.0-kali5-common/include/asm-generic/bug.h:22,
from /usr/src/linux-headers-5.18.0-kali5-common/arch/arm64/include/asm/bug.h:26,
from /usr/src/linux-headers-5.18.0-kali5-common/include/linux/bug.h:5,
from /usr/src/linux-headers-5.18.0-kali5-common/arch/arm64/include/asm/cpufeature.h:19,
from /usr/src/linux-headers-5.18.0-kali5-common/arch/arm64/include/asm/hwcap.h:9,
from /usr/src/linux-headers-5.18.0-kali5-common/arch/arm64/include/asm/arch_timer.h:12,
from /usr/src/linux-headers-5.18.0-kali5-common/arch/arm64/include/asm/timex.h:8,
from /usr/src/linux-headers-5.18.0-kali5-common/include/linux/timex.h:67,
from /usr/src/linux-headers-5.18.0-kali5-common/include/linux/time32.h:13,
from /usr/src/linux-headers-5.18.0-kali5-common/include/linux/time.h:60,
from /usr/src/linux-headers-5.18.0-kali5-common/arch/arm64/include/asm/stat.h:12,
from /usr/src/linux-headers-5.18.0-kali5-common/include/linux/stat.h:6,
from /usr/src/linux-headers-5.18.0-kali5-common/include/linux/module.h:13,
from /usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prltg.c:5:
/usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prltg.c: In function 'prl_tg_probe_common':
/usr/src/linux-headers-5.18.0-kali5-common/include/linux/kern_levels.h:5:25: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'void *' [-Wformat=]
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
| ^~~~~~
/usr/src/linux-headers-5.18.0-kali5-common/include/linux/printk.h:418:25: note: in definition of macro 'printk_index_wrap'
418 | _p_func(_fmt, ##__VA_ARGS__); \
| ^~~~
/usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prltg.c:520:9: note: in expansion of macro 'printk'
520 | printk(KERN_INFO "detected %s, base addr %08lx, IRQ %d\n",
| ^~~~~~
/usr/src/linux-headers-5.18.0-kali5-common/include/linux/kern_levels.h:14:25: note: in expansion of macro 'KERN_SOH'
14 | #define KERN_INFO KERN_SOH "6" /* informational */
| ^~~~~~~~
/usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prltg.c:520:16: note: in expansion of macro 'KERN_INFO'
520 | printk(KERN_INFO "detected %s, base addr %08lx, IRQ %d\n",
| ^~~~~~~~~
/usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prltg.c: In function 'prl_tg_init_module':
/usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prltg.c:646:13: warning: unused variable 'rc' [-Wunused-variable]
646 | int rc;
| ^~
cc1: some warnings being treated as errors
make[3]: *** [/usr/src/linux-headers-5.18.0-kali5-common/scripts/Makefile.build:293: /usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prltg.o] Error 1
make[2]: *** [/usr/src/linux-headers-5.18.0-kali5-common/Makefile:1858: /usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg] Error 2
make[2]: Leaving directory '/usr/src/linux-headers-5.18.0-kali5-arm64'
make[1]: *** [Makefile:43: prl_tg] Error 2
make[1]: Leaving directory '/usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg'
make: *** [Makefile.kmods:47: compile] Error 2
make: Leaving directory '/usr/lib/parallels-tools/kmods'
Error: could not build kernel modules
modprobe: FATAL: Module prl_tg not found in directory /lib/modules/5.18.0-kali5-arm64
modprobe: FATAL: Module prl_tg not found in directory /lib/modules/5.18.0-kali5-arm64
Error: failed to install Parallels Guest Tools!
 
Can confirm, that Parallels desktop updated to 17.1.4 same error as Kali ARM 2022.2... can't understand how basic things not working
 
Same for me. (CentOS-Stream-9 on Mac-book pro m1 max).

I am not keen to run the latest CentOS but anybody know if an older version or a different distribution would work?
 
You must log in or register to reply here.
Back
Top