Can't boot into Bootcamp, but parallels BC fine

M

mcadm

Bit poster
Hi All,

I've been having problems booting to BC, but I can boot into my BC from parallels just fine. If I try to boot into bootcamp, the windows logo doesn't even display, and I just get a black screen. I've managed to Enable Boot logging, so i've posted a copy of that below:

Service Pack 211 17 2006 14:59:09.375
Loaded driver \WINDOWS\system32\ntoskrnl.exe
Loaded driver \WINDOWS\system32\hal.dll
Loaded driver \WINDOWS\system32\KDCOM.DLL
Loaded driver \WINDOWS\system32\BOOTVID.dll
Loaded driver ACPI.sys
Loaded driver \WINDOWS\system32\DRIVERS\WMILIB.SYS
Loaded driver pci.sys
Loaded driver isapnp.sys
Loaded driver ohci1394.sys
Loaded driver \WINDOWS\system32\DRIVERS\1394BUS.SYS
Loaded driver compbatt.sys
Loaded driver \WINDOWS\system32\DRIVERS\BATTC.SYS
Loaded driver pciide.sys
Loaded driver \WINDOWS\system32\DRIVERS\PCIIDEX.SYS
Loaded driver MountMgr.sys
Loaded driver ftdisk.sys
Loaded driver dmload.sys
Loaded driver dmio.sys
Loaded driver ACPIEC.sys
Loaded driver \WINDOWS\system32\DRIVERS\OPRGHDLR.SYS
Loaded driver PartMgr.sys
Loaded driver VolSnap.sys
Loaded driver atapi.sys
Loaded driver disk.sys
Loaded driver \WINDOWS\system32\DRIVERS\CLASSPNP.SYS
Loaded driver fltMgr.sys
Loaded driver SymSnap.sys
Loaded driver KSecDD.sys
Loaded driver Ntfs.sys
Loaded driver NDIS.sys
Loaded driver Mup.sys
Did not load driver ACPI Multiprocessor PC
Did not load driver Audio Codecs
Did not load driver Legacy Audio Drivers
Did not load driver Media Control Devices
Did not load driver Legacy Video Capture Devices
Did not load driver Video Codecs
Did not load driver WAN Miniport (L2TP)
Did not load driver WAN Miniport (IP)
Did not load driver WAN Miniport (PPPOE)
Did not load driver WAN Miniport (PPTP)
Did not load driver Packet Scheduler Miniport
Did not load driver Packet Scheduler Miniport
Did not load driver Direct Parallel
Did not load driver Audio Codecs
Did not load driver Legacy Audio Drivers
Did not load driver Media Control Devices
Did not load driver Legacy Video Capture Devices
Did not load driver Video Codecs
Did not load driver WAN Miniport (L2TP)
Did not load driver WAN Miniport (IP)
Did not load driver WAN Miniport (PPPOE)
Did not load driver WAN Miniport (PPTP)
Did not load driver Packet Scheduler Miniport
Did not load driver Packet Scheduler Miniport
Did not load driver Direct Parallel
Did not load driver Intel Processor
Did not load driver Intel Processor
Did not load driver Microsoft AC Adapter

etc, etc

--------------------------

I'm thinking about reinstalling the Bootcamp drivers for XP again (inside of Parallels), or perhaps removing and reinstalling Parallels Tools for Windows. Again, i can only do this through Parallels bootcamp, so i'm a little worried about messing the entire installation up. Perhaps anyone is experiencing the same issue? Originally I had v3094, and when I recognized the issue, I upgraded to 3120. Any help would be much appreciated. Thank you in advance.
 
That's not going to work, because I boot into BC with Parallels constantly, so the Last Known Good will always default to that profile. I did an F8, which is how I enabled Boot Logging.
 
A little more info, I believe the problem started because the host OS (OSx) crashed while I was booted into BC Parallels using a USB HD. The USB HD worked fine up until then, but now I can't get it to open in BC Parallels. It detects it as an external device but won't mount it.
 
I"m having a similiar but oposit issue. Booting directing into BootCamp works fine. Booting into BootCamp via Parallels ends in a black screen. Doesn't change. It does get by the Windows XP splash screen, then sits at a black screen.

-ric
 
You must log in or register to reply here.
Back
Top