An odd clicking sound with Parallels. Has anyone else noticed?

Same here! Anyone know the issues, please post. I am nervously waiting for my Mac to die, hopefully it won't. Alison
 
This happens to me as well, definitely 100% Parallels related, I've had my MBP for about 5 years and I've never experienced the sound before using Parallels. I'm running Parallels 9 with Mavericks. It doesn't really bother me as long as it isn't doing any damage to my internal components. My HD is fairly new so that almost certainly isn't the issue, it's something with Parallels and it happens at some point every time I'm using my VM without fail.
 
Popping sound since update to Mavericks

Hello,

I too am getting this sounds and it has happened ever since I updated from snow leopard to Mavericks about 1.5 months ago and my Win7 paralles VM pops nearly every single time it starts or wakes from resume, the popping sound is as if it is trying to output the windows audio but it comes out as popping sounds instead, there was an update last nights and I though that may have helped but it has not.

I have tried the un-installation and re-installation of parallels tools a few times to no success.

the PD version I am using is Build 8.0.1.18619 (revision April 24th, 2014)

I believe their is an audio problem with upgrade to Mavericks and parallels isn't able to handle something, possibly driver related.

Hope this can be resolved soon as it is a huge nuisance and this shouldn't really be happening with an OS upgrade.
 
I was experiencing this issue using Parallels 8 and Mountain Lion. I upgraded Parallels 9 when I upgraded to Mavericks. This problem occurred in both settings and it is still happening. I'm deeply disappointed Parallels' lack of a fix, especially considering most of us are using the latest software.

I think Parallels has just lost a customer to VMWare...
 
I have the same issue. I was using Parallels 8 with Mountain Lion and had this popping sound appear whenever the system is supposed to play a sound or make a beep with the PC speaker. I upgraded to Mavericks but kept Parallels 8 and rebuilt my VMs with Windows 7 x32 instead of x64 and the popping sound still appears. It's so loud it actually makes the whole laptop vibrate (I fear that given enough time, it may damage the speakers), and setting the Windows audio control to mute doesn't stop it. Turning down the Mac volume doesn't make a difference either. Suspending the VM and closing and reopening Parallels doesn't help either. The only fix is to restart the whole Mac, and the popping sound starts after a few hours of working.

This is a serious issue that needs to be fixed once and for all.
 
Looran@Parallels said:
Hi Everyone,

Please follow the steps outlined below:

1) Start Parallels Desktop, do not start your VM.
2) Select the Configure option from the Virtual Machine menu
3) From the Sound menu, check your Output option.
4) Select the "Built-in Output" option as the default output.
5) Lock the Configure area so the VM can't make further changes
6) Restart the VM

If the issue does not resolve, then please post your Problem report ID's here by following the link: http://kb.parallels.com/9058

Thanks,
Looran
Click to expand...

I've been plagued with this problem since Parallels 8 and was so annoyed and frustrated with it I was about to call it quits on Parallels. But these steps fixed my problem! Thank you!
 
LeVeL5 said:
I have the same issue. I was using Parallels 8 with Mountain Lion and had this popping sound appear whenever the system is supposed to play a sound or make a beep with the PC speaker. I upgraded to Mavericks but kept Parallels 8 and rebuilt my VMs with Windows 7 x32 instead of x64 and the popping sound still appears. It's so loud it actually makes the whole laptop vibrate (I fear that given enough time, it may damage the speakers), and setting the Windows audio control to mute doesn't stop it. Turning down the Mac volume doesn't make a difference either. Suspending the VM and closing and reopening Parallels doesn't help either. The only fix is to restart the whole Mac, and the popping sound starts after a few hours of working.

This is a serious issue that needs to be fixed once and for all.
Click to expand...

I've found a fix for the problem whenever it happens, I hope it works for everyone else:

1) Open the Sound preference panel
2) Select another alert sound. It plays. The clicking is instantly gone and audio on the VM works perfectly again.
3) Select the alert sound you had before.
4) Profit

This is the only thing that's worked for me reliably and consistently. When my Mac goes to sleep or I suspend/resume the VM, it almost always starts doing the clicking sound right away, so I have to go hit the Sound prefpane several times a day. I haven't tested if quick-looking a sound file or other ways to make the Mac play a sound work around this issue.
 
I used this fix!

this drove me crazy, i found this and it fixed my problem!!

http://www.knowwindows.com/view/346633-fix-sound-issue-on-macs-with-parallels.html

I've seen on other sites people complaining about not having any sound after install Windows 7 under Parallels. The fix is to do the following:

1. Make sure you've updated Parallels to the latest version 4.3180.
2. Make sure you've installed the Parallels Tools pack.
3. From the Control Panel, click on the Device Manager
4. Find the device that's not installed, it's listed as 'Multimedia Audio Controller'
5. Click on the device and install/update the driver.
6. Let Windows go out to the Internet to find the driver.
7. Install the selected drive and click 'Ok'

Windows will install the driver and give you sound inside your Windows 7 VM.


Hope this helps :)
 
Try this:
1. In Mac Os, press Shift and the increase or decrease volume key 4 or 5 times. You should hear the clicking sound.
2. Press the Mute key in (Mac OS) several times. Do #1 above to retest. At some point the clicking will stop and the alert tone will sound. If not, try pressing Mute four or five more times, and doing #1 again until the clicking stops and the alert tone sounds.

This has worked for me, but always comes back after suspending and restarting the VM. Doing the above always works (again, for me.)
 
Last edited:
For me the steps outlined at http://glimpseoftheobvious.blogspot.be/2014/02/how-to-fix-annoying-popping-audio-with.html fixed the issue:
Control Panel->Hardware and Sound->Sound; Playback tab
Select "Speakers" then click "Properties"; Advanced tab
From the "Default Format" selection list select a different format and click "Test"
From the "Default Format" selection list select the default "16 bit, 44100 Hz (CD Quality) format and click "Test"
In my case that resolved the issue..

(ps. for me reinstalling Parallel Tools or selecting the "Built-in Output" in the VM config didn't help)
 
Tried the audio solution, didn't fix the problem.

12425-13953 is the support ID, I've opened another ticket.
 
For me, the popping sound does not seem to be audio related. The audio in Windows works just fine, and the sound does not come through the headphones. The sound is coming from under my MacBook keyboard, as if it is the hard drive making a physical popping sound. It does not occur when Windows is generating a sound but when the CPUs are being taxed with heavy workload.
 
Hi

I just want to report the same problem for me.

I just upgraded to PD10 on my macbook unibody and had teh clicks (it rather sounds like a knock to me).

I was first scared, it sounded like my macbook was "dilatating" and a piece was breaking (it heats up a bit when running Parallels), so Im "happy" to see this is a know issue.

Now, I just want to fix this s... (I mean "stuff")

thanks
 
Martin_Baron said:
For me, the popping sound does not seem to be audio related. The audio in Windows works just fine, and the sound does not come through the headphones. The sound is coming from under my MacBook keyboard, as if it is the hard drive making a physical popping sound. It does not occur when Windows is generating a sound but when the CPUs are being taxed with heavy workload.
Click to expand...

Absolutely, I agree with that. It s more like a mechanichal and physically triggered sound.
As I said before, like a piece expanding under heat (also it's not really hot in my mac what this sounds start)
 
This also happening to me, odd sound 'blep' 'blep' it's not from headphone, but rather from hdd I think, but this only happen, when I start Parralel desktop 10
I use Yosemite 10.10.1 , PD ver 10, SSD Cruxial MX100, Win 7 pro, I don't know what causing this...
please helppp...
anyone succes solving this ??
 
I've tried
Bart_Rousseau
solution, for a couple of days I don't hear the blip sound when running pararel.... hope this works...

For me the steps outlined at http://glimpseoftheobvious.blogspot.be/2014/02/how-to-fix-annoying-popping-audio-with.html fixed the issue:
Control Panel->Hardware and Sound->Sound; Playback tab
Select "Speakers" then click "Properties"; Advanced tab
From the "Default Format" selection list select a different format and click "Test"
From the "Default Format" selection list select the default "16 bit, 44100 Hz (CD Quality) format and click "Test"
In my case that resolved the issue..
 
I am getting the same problem - I have Parallels 10.1.3 and Windows 7 Professional Service Pack 1 on a Macbook pro 17 inch mid 2009
The popping sound occurs whenever the system tries to play a sound or alert. It happens for both Windows and OS X sounds.
Once it has started the popping problem with Mac sounds continues even when Parallels has been shutdown. The popping continues even when windows and OS X sound are set to 0! It does go away from Windows if you set the Sound to mute on the devices panel. But still get popping from OS X sounds.
I've tried most of the solutions suggested so far. Including trying different sound formats - I went through every one each one just popped. I did manage to resolve it for a few hours the other day but can't remember how - Frustrating. However the problem has returned yet again.
I have tried reinstalling parallels tools - how do I know if I have the latest versions?
Am just about to restart OS X to see if it stays away.
 
You must log in or register to reply here.
Back
Top