Can't connect to Internet on windows side using parallels!!!

MenaR said:
When I enter the same command that Stacey gave, I get "no matching processes were found". I'm running Parallels 6.0 and having problems since the update. I was fine with 5.0. :(
Click to expand...


"Make sure that VM is in Shared Networking mode. If this doesn't help, please click Start -> Run and execute cmd.exe. Type in the appeared window command "ipconfig /all". Then, without closing the window, click Parallels Destkop menu "Help"->"Report a Problem", send a problem report (it is not necessary to provide description) and post here the report ID."
 
Same problem after upgrading to Parallels 6

Parallels,
I followed the reporting step above and my inquiry ID is 6818804.

Please find solution so I can access my wireless through Parallels.
 
Bill A said:
Parallels,
I followed the reporting step above and my inquiry ID is 6818804.

Please find solution so I can access my wireless through Parallels.
Click to expand...

Hi,
please describe in details what is not working. Whether it worked before upgrade to 6.0. Because in the problem-report I see that surfing the Web from VM should work ok
 
I did this and posted the ID and it hasn't been posted. Just in case, let me do it again!

The error number is 6820191
 
I don't know why my posts don't get posted, but I did it a third time, and it didn't get posted. :( Here's yet another attempt!

Error number:
6834966
 
MenaR said:
I don't know why my posts don't get posted, but I did it a third time, and it didn't get posted. :( Here's yet another attempt!

Error number:
6834966
Click to expand...

It is strange.
Try these stepts:

1 said:
Right-click My Computer, click Manage, expand Services and Applications under Computer Management,
and then click Services.

Verify that the DHCP Client service is running.

If the service is stopped, right-click DHCP Client, and then click Start.
Click to expand...

2 said:
open Command Prompt in Windows (Start > Run.. > type 'cmd' > OK)

And enter following command:

netsh winsock reset

netsh int ip reset reset.log

then restart Windows
Click to expand...

Let me know if this have not helped
 
Unfortunately it didn't.... I did all you asked. All of this began when I switched up to Parallels 6.0. Nothing changed other than that. I've generated a new problem report in case you need it again: 6835911


Thanks for your help thus far.
 
MenaR said:
Unfortunately it didn't.... I did all you asked. All of this began when I switched up to Parallels 6.0. Nothing changed other than that. I've generated a new problem report in case you need it again: 6835911


Thanks for your help thus far.
Click to expand...

this looks strange.. I can suggest a remote session next week. Let me know via private message your email and acceptable timeframe if you agree. My timeframe is 8AM-5PM GMT
 
Problem resolved

I'm delighted to report that Dmitry from Parallels helped me this morning and solved the problem. Turns out that the DHCP wasn't turned on in the Sharing preferences. One click and everything works! Including accessing the Internet from Windows while using an air card with Verizon.
 
NestorH said:
I'm delighted to report that Dmitry from Parallels helped me this morning and solved the problem. Turns out that the DHCP wasn't turned on in the Sharing preferences. One click and everything works! Including accessing the Internet from Windows while using an air card with Verizon.
Click to expand...

Where is this option? I don't see DHCP in the options on my mac or on my VM.
 
It's found in Parallels preferences

MenaR said:
Where is this option? I don't see DHCP in the options on my mac or on my VM.
Click to expand...

Open the Preferences panel in Parallels. Then navigate: Advanced (tab)>Network: Change Settings> Shared (tab)>Check Enable IPv4 DHCP

Nestor
 
Problem ID 7208628

I just installed Parallels on a macbook and an iMac, macbook works without a hitch, but on the iMac I can't connect to the internet from Windows.

I've tried all suggestions mentioned in this thread.

Info:

Parallels Desktop build: 6.0.11828

Windows Network Adapter type: TAP-Win32 Adapter V9

Network configuration on Mac side: Connected through Wifi AND Ethernet, IPv4 configuration using DHCP

What antivirus programms you are using: none

The output of ifconfig command from Mac side:

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether c8:bc:c8:90:fe:0f
inet6 fe80::cabc:c8ff:fe90:fe0f%en0 prefixlen 64 scopeid 0x4
inet 192.168.0.117 netmask 0xffffff00 broadcast 192.168.0.255
media: autoselect (100baseTX <full-duplex,flow-control>)
status: active
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
lladdr 78:ca:39:ff:fe:31:79:c8
media: autoselect <full-duplex>
status: inactive
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether c8:bc:c8:b7:f9:77
inet6 fe80::cabc:c8ff:feb7:f977%en1 prefixlen 64 scopeid 0x6
inet 192.168.0.101 netmask 0xffffff00 broadcast 192.168.0.255
media: autoselect
status: active
vnic0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:1c:42:00:00:08
inet6 fe80::21c:42ff:fe00:8%vnic0 prefixlen 64 scopeid 0x7
inet 10.211.55.2 netmask 0xffffff00 broadcast 10.211.55.255
inet6 fec0:0:0:fea9::2 prefixlen 64
media: autoselect
status: active
vnic1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:1c:42:00:00:09
inet6 fe80::21c:42ff:fe00:9%vnic1 prefixlen 64 scopeid 0x8
inet 10.37.129.2 netmask 0xffffff00 broadcast 10.37.129.255
inet6 fec0:0:0:feaa::2 prefixlen 64
media: autoselect
status: active

The output of ipconfig /all command and tracert www.parallels.com from Windows side:
windows.png


I also just to be sure reported the problem, the ID is 7208628
 
Cannot connect to wireless.

Am using Windows XP, Parallels Desktop 5, have solid connection on Mac side tried:
sudo killall -hup pvsnatd, but it asked for a password, but would not allow me to put in a password.
tried this guide http://www.parallels.com/en/download...User_Guide.pdf on page 157 - no luck
have read about every thread there is on "wireless"


Using Network Adaptor1 > Shared Networking
No antivirus programs running
Problem ID 7660481

Help is very much appreciated, been on this for two days now.
 
RobertLid said:
Using Network Adaptor1 > Shared Networking
No antivirus programs running
Problem ID 7660481

Help is very much appreciated, been on this for two days now.
Click to expand...

Hi,

Try these steps:

open Command Prompt in Windows (Start > Run.. > type 'cmd' > OK)

And enter following command:

netsh winsock reset

netsh int ip reset reset.log

then restart Windows
Click to expand...
 
Having the same problem

Hi,
I've connected to the internet using Airport on the mac. The internet on the mac side is working absolutely fine. Im running 10.6.6 on an iMac 27-inch Intel Core 2 Duo computer.

I've installed Windows XP Pro on Parallels 5. I have the Shared Networking on. And the DHCP is checked. But the internet is still not working. Initially I thought it may be a problem with my Internet Explorer settings, but I checked those and it seems to be a problem with parallels itself.

I have a report id : 7724465

Help !!!
Sasha
 
SashaA said:
Hi,
I have the Shared Networking on.

I have a report id : 7724465
Click to expand...

Hi,

the virtual machine doesn't have network card. You need to add it with steps like

"Stop the Virtual Machine and in the Virtual Machine Directory
- select a Virtual Machine, click Configure
- Under Hardware section check that Network Adapter is present in list, If it is missing, click "+" and add Network Adapter"
 
I run Windows 7 upgrade advisor and it tells me that the driver installed for the Parallels ethernet adapter is not compatible with Windows 7. I have also tried to update driver but it says that I have the most up to date driver. There is connectivity because things still download in the background and update. When I started the VM today it started downloading the new SP for Win7.
Here is what I get as far as network details:
My Connection-specific DNS Suffix:
Description: Parallels Ethernet Adapter
Physical Address: ‎00-1C-42-A5-98-06
DHCP Enabled: Yes
IPv4 Address: 10.0.1.6
IPv4 Subnet Mask: 255.255.255.0
Lease Obtained: Thursday, March 10, 2011 5:52:34 AM
Lease Expires: Friday, March 11, 2011 5:57:02 AM
IPv4 Default Gateway: 10.0.1.1
IPv4 DHCP Server: 10.0.1.1
IPv4 DNS Server: 10.0.1.1
IPv4 WINS Server:
NetBIOS over Tcpip Enabled: Yes
Link-local IPv6 Address: fe80::540f:3a9c:17a:2f80%13
IPv6 Default Gateway:
IPv6 DNS Server: fe80::21c:42ff:fe00:18%13

This by the way is in Airport bridged. I have IPv4 connectivity but there is none for IPv6. I can put it on pretty much any bridged setting and I get the same results. When I move it to shared I get no connectivity on IPv4 or IPv6. Everything works normal on the Mac side of the house.

When using Windows 7 upgrade advisor and dealing with another program (Cabela's Outdoor Adventure) it asks me to get an updated compatible version. When I select this it gives me an IE screen with this address: http://www.activision.com/swfaddress/swfaddress.html?gamepage|en_US|gameId:COA2009&brandId:Cabelas
Of course I get the IE cannot display the webpage but in the Windows 7 Upgrade advisor screen it goes to the Activision/Cabela's website.

I guess I only have one question.... How come my internet doesn't work now with P6? I am currently using Build 6.0.11992 because I am reading that the newest build isn't that great.
 
You must log in or register to reply here.
Back
Top