I'm running the VM on an external SSD from my 2017 Macbook, 16gb and i7 chip. Latest version of Parallels. 15.1.4 build 47270 I go through the install process, but as soon as it gets to Big Sur login, all I get is a black screen. This is a common experience, according to Apple Forums. The beta runs fine on VMWare Fusion. I follow this procedure. Create a new Parallels VM by installing a fresh copy of macOS Catalina from Recovery Partition (or use existing VM). DO NOT INSTALL Parallels Tools or uninstall it if it's already installed. Login to iCloud account which have Apple Developer Program membership active (thanks @paulrbarnard). Resize disk drive to be at least 80 GB (see article 112119 in the parallels knowledge base website on how to do that). Download and install your Beta profile (https://developer.apple.com/download/). (blank) On a host, supported Mac, run these commands in a terminal Code Block sysctl hw.model this will get you mac_hw_model (something similar to MacBookPro14,3). ioreg -l | grep board-id this will get you board_id (something similar to Mac-551B86E5744E2388). 7. In the Parallels VM configuration, under Hardware -> Boot Order -> Advanced Settings -> Boot flags, enter the following (inserting the information noted above where shown): devices.mac_hw_model="mac_hw_model" devices.smbios.board_id="board_id" where mac_hw_model and board_id inside the quotes should be substituted to your values. 7. Proceed with downloading and installation of macOS Big Sur via System Preferences.
Did all of that. Got it all right on the 3rd attempt (and I had to reinstall Catalina on Parallels twice). Was very excited as Big Sur booted up. Cant' get past the login screen. I login, and after about 30 seconds, it just refreshes the login screen. Any advice?
Hello, please collect the tech report right after the issue reproduced and post the report's ID here. Thanks in advance.
Hello, could you please collect crash logs from inside guest. If you cannot boot, try recovery mode or mount disks to another macOS guest and try there.
I have had the same exact two types of experience. Last thing I have tried has been the Beta 3. I am waiting for the public beta to try again.
Thank you for sharing your experience. You can also subscribe on this article and receive all updates
Parallels Engineering Team works hard to make Parallels Desktop compatible with the macOS 11 Big Sur. Thank you for understanding.
I found after many tries to set up Big Sur on my Parallels Pro 15.1.4, all I needed to do was not install the Parallels tools and it worked. Every time I installed the tools, everything ground to a halt (before or after Big Sur installed). I didn't need to add the boot flags (it worked with or without them). I'm running on a Macbook Pro with 10.15.6 Catalina. Hope that helps anyone trying.
To update my last post, I installed Parallels 16 that was just released and now I can install the Parallels tools without issue. So far, so good.