Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Hotfix Update: Parallels Desktop 4.0 Build 3810 is available
- Thread starter tacit_one
- Start date
Just a quick note: I tried to use Parallels with Windows 7 only to see the install seemingly hang at the point of installing Parallels Tools. When I clicked the small "lock" button at this point next to the status bar of the Parallels Tools installation (where it says step 4 of 4), and put the installation into manual mode, it dropped me back into Windows 7. I could see that the problem is that Parallels is trying to install unsigned drivers. The user has to manually approve several of these unsigned drivers before P. tools installation can finish.
John@Parallels
Forum Maven
John
I am also having MAJOR problems running large programs (they are very very slow) (e.g. Quickbooks) What do you suggest I look at to figure out what the issue is.
I suggest you create ticket in support, recently I investigated situation, and found that problem was caused by unsupported version of Adobe CS and antivirus
John@Parallels
Forum Maven
Yes, it is default behavior for it since Vista, but I am not sure why it is going to upgrade, if Windows 7 is newly installed
John, submitted ticket 37283. I do not run Adobe CS and my AV is Vipre.
I was also hoping you were going to clarify your "incorrect CPU driver" statement that you made in the release. It seems myself and several other people in this thread are confused by your statement. I am not sure how PD 3's driver can be in PD 4 because it all comes from the Microsoft OS and if the OS is the same then the driver should be the same. But maybe we are misunderstanding you.
You also refer to CPU driver, I am afraid that there really is no such "Category" on the driver list under hardware. There is only a driver listed for "COMPUTER" and if that is what you meant I think several of us here have tried to update the driver only to receive the message "There is no more current driver then the one installed". Again perhaps a little more clarification from Parallels?????
I was also hoping you were going to clarify your "incorrect CPU driver" statement that you made in the release. It seems myself and several other people in this thread are confused by your statement. I am not sure how PD 3's driver can be in PD 4 because it all comes from the Microsoft OS and if the OS is the same then the driver should be the same. But maybe we are misunderstanding you.
You also refer to CPU driver, I am afraid that there really is no such "Category" on the driver list under hardware. There is only a driver listed for "COMPUTER" and if that is what you meant I think several of us here have tried to update the driver only to receive the message "There is no more current driver then the one installed". Again perhaps a little more clarification from Parallels?????
I suggest you create ticket in support, recently I investigated situation, and found that problem was caused by unsupported version of Adobe CS and antivirus
I didn't see an answer for why chinese characters are in dock. support please answer
I have same behavior as other posters. Certain windows applications (not all), when minimized to dock have their titles displayed in chinese. The same applications display correctly when not minimized (i.e. the caption in the title bar is in english). I don't understand all the talk about video drivers, I think that is an unrelated issue that is also up for discussion in this thread.
Anyone have the answer?
I have same behavior as other posters. Certain windows applications (not all), when minimized to dock have their titles displayed in chinese. The same applications display correctly when not minimized (i.e. the caption in the title bar is in english). I don't understand all the talk about video drivers, I think that is an unrelated issue that is also up for discussion in this thread.
Anyone have the answer?
I don't have this problem but I would assume it has to do with installation. If your PD 3 worked and PD 4 does not I'm not buying "corrupt" font file. I assume you've un-installed and re-installed PD 4 but I have not seen anyone answer this problem with a sensible solution. Sorry
I have same behavior as other posters. Certain windows applications (not all), when minimized to dock have their titles displayed in chinese. The same applications display correctly when not minimized (i.e. the caption in the title bar is in english). I don't understand all the talk about video drivers, I think that is an unrelated issue that is also up for discussion in this thread.
Anyone have the answer?
John, submitted ticket 37283. I do not run Adobe CS and my AV is Vipre.
I was also hoping you were going to clarify your "incorrect CPU driver" statement that you made in the release. It seems myself and several other people in this thread are confused by your statement. I am not sure how PD 3's driver can be in PD 4 because it all comes from the Microsoft OS and if the OS is the same then the driver should be the same. But maybe we are misunderstanding you.
You also refer to CPU driver, I am afraid that there really is no such "Category" on the driver list under hardware. There is only a driver listed for "COMPUTER" and if that is what you meant I think several of us here have tried to update the driver only to receive the message "There is no more current driver then the one installed". Again perhaps a little more clarification from Parallels?????
kevinw,
We have an article with screenshots on how to update CPU (processor) driver. You can take a look by following the link:
http://kb.parallels.com/en/5810
When you install Parallels Tools, specific drivers are installed on the guest operating system, and as Parallels Desktop 3 and Parallels Desktop 4 have their own Parallels Tools installations, those may differ.
Try This First...
Try turning off the multiple display support under the Virtual Machine Configuration for Coherence. Please report back if that fixes the problem. That is what worked for me. Unfortunately, I need multiple monitor support, so I am limping along right now waiting for Parallels to investigate this. My ticket was finally elevated today.
I have same behavior as other posters. Certain windows applications (not all), when minimized to dock have their titles displayed in chinese. The same applications display correctly when not minimized (i.e. the caption in the title bar is in english). I don't understand all the talk about video drivers, I think that is an unrelated issue that is also up for discussion in this thread.
Anyone have the answer?
Try turning off the multiple display support under the Virtual Machine Configuration for Coherence. Please report back if that fixes the problem. That is what worked for me. Unfortunately, I need multiple monitor support, so I am limping along right now waiting for Parallels to investigate this. My ticket was finally elevated today.
John@Parallels
Forum Maven
kevinw
Please ticket ID here
Please ticket ID here
Last edited:
Try turning off the multiple display support under the Virtual Machine Configuration for Coherence. Please report back if that fixes the problem. That is what worked for me. Unfortunately, I need multiple monitor support, so I am limping along right now waiting for Parallels to investigate this. My ticket was finally elevated today.
This did not work for me. Note that I did this while my virtual machine was running. I also need multiple monitor support and can deal with not being able to read the titles of windows as opposed to only having a single monitor in any case.
Try it with VM not running...
I have to do this with the VM off to make it work. After it is running, you can try turning multiple monitor on while the VM is running.
This did not work for me. Note that I did this while my virtual machine was running. I also need multiple monitor support and can deal with not being able to read the titles of windows as opposed to only having a single monitor in any case.
I have to do this with the VM off to make it work. After it is running, you can try turning multiple monitor on while the VM is running.
John@Parallels
Forum Maven
John
As you will see in several post below I have already submitted a ticket. #37283
It is report
I asked to create ticket in
http://www.parallels.com/support/desktop/request/
John
Got it on the ticket. No. Parallels #659371
Something also occured to me, when trying to update the processor driver in the Guest OS, should PD 4 in the installation already put the drivers in the Guest OS or do I somehow need to direct it the CD Disk Image? If so how do I get the Windows to read that?
Got it on the ticket. No. Parallels #659371
Something also occured to me, when trying to update the processor driver in the Guest OS, should PD 4 in the installation already put the drivers in the Guest OS or do I somehow need to direct it the CD Disk Image? If so how do I get the Windows to read that?
John@Parallels
Forum Maven
kevinw
Please check support answer
Please check support answer
I have to do this with the VM off to make it work. After it is running, you can try turning multiple monitor on while the VM is running.
I just tried this and it fixes the issue. If I enable multi-monitor support once the VM is booted, it remains fixed. Unfortunately, as soon as I reboot again, the problem is back, so I need to remember to do this every time I start my VM. I did open up a ticket (663077) with support. They had me try build 3810.237520 which did NOT resolve the problem. At least the hack of disabling multi-monitor support still works.
I just tried this and it fixes the issue. If I enable multi-monitor support once the VM is booted, it remains fixed. Unfortunately, as soon as I reboot again, the problem is back, so I need to remember to do this every time I start my VM. I did open up a ticket (663077) with support. They had me try build 3810.237520 which did NOT resolve the problem. At least the hack of disabling multi-monitor support still works.
For anyone at Parallels -- any chance of getting this fixed? I don't seem to be getting anywhere with support other than them saying it looks like its a bug.
paysolutions
Bit poster
Apple USB Modem
Does anyone know if there is a date/time frame for the Apple USB modem to be fixed, so that it works in the guest OS?
Thanks in advance.
Does anyone know if there is a date/time frame for the Apple USB modem to be fixed, so that it works in the guest OS?
Thanks in advance.