I have the problem, that windows 7 will not start. I get the answer "Network bootrom is installed. Trying to boot from SATA drive 1. I found a note, to start from the windows cd. But if i try to open the settings for windows, i get the information that to change the not, I have to continue die virtual machine and then I should turn off the virtual machine. Is there anyone who can help me? Sorry for my english!!!
How to Use the BootROM Menu to Download and Install a New Image to an EXOS Switch 1. Before rebooting the switch, connect to the switch via the serial console port. 2. Reboot the switch. While the switch is booting, press and hold <spacebar> when prompted to enter the BootROM. * Summit X450 * Version 1.0.0.7 by Release-Manager on Thu 04/07/05 Copyright 2003-2005, Extreme Networks, Inc. Press and hold the <spacebar> to enter the bootstrap. Starting Primary Bootloader ... Running POST... PASSED Version 1.0.0.9 by Release-Manager on Wed 06/01/05 Copyright 2003-2005, Extreme Networks, Inc. Press and hold the <spacebar> to enter the bootrom. BootRom > BootRom > h boot boot an image loader Sets which BootLoader BootStrap will boot reboot Reboot system (hard reset) rz zmodem download show display information config select configuration enable enable features h on-line help help on-line help ? on-line help hi display command history dir list contents of CF directory cd change working CF directory pwd print working CF directory ping ping remote host configip configure the bootloader ip address showip show the configuration of the bootloader ip address download download an image 3. If the IP address needs to be changed then type: BootRom > configip ipaddress 10.10.10.2/24 gateway 10.10.10.1 4. Ping the TFTP server holding the image to make sure there is connectivity: BootRom > ping 10.10.10.10 PING 10.10.10.10 (10.10.10.10): 56 data bytes 64 bytes from 10.10.10.10: icmp_seq=0 ttl=128 time=0.358 ms 64 bytes from 10.10.10.10: icmp_seq=1 ttl=128 time=0.290 ms 64 bytes from 10.10.10.10: icmp_seq=2 ttl=128 time=0.293 ms 64 bytes from 10.10.10.10: icmp_seq=3 ttl=128 time=0.294 ms --- 10.10.10.10 ping statistics --- 4 packets transmitted, 4 packets received, 0% packet loss round-trip min/avg/max = 0.290/0.300/0.358 ms 5. Download the new image: BootRom > download image 10.10.10.10 summitX450-11.2.3.3.xos Loading file: tftp://10.10.10.10/summitX450-11.2.3.3.xos|Loading file: /dev/ram@0x880 00050- Entry address is 86000058 Executing the image PMON tar. Version: 1.0 Loaded vmlinux at 0x8A000000, 2954344 (0x2D1468) bytes Application filename: /dev/ram@0x8A000000,2D1468. Loading vmlinux: /dev/ram@0x8A000000,2D1468. /dev/ram@0x8A000000,2D1468 loaded okay. PMON tar returning to PMON. client return: 0 Loading file: /dev/ram@0x8A000000\ Entry address is 85000000 Rescue mode will ERASE ALL DATA, download a new EXOS image and install it. No data of any kind will be preserved. Ok to continue? (Y/N) y Installing EXOS 11.2.3.3 press ENTER to reboot: After pressing <enter>, the switch will boot with the new image. Now Enjoy Music On - Spotify premium apk on Windows.
