Installing Parallel tools for Fedora 13

Discussion in 'Linux Virtual Machine' started by pidepiper, Sep 10, 2010.

  1. pidepiper

    pidepiper Bit poster

    Messages:
    2
    I am receiving the error below when I try to install Parallel tools for Fedora 13. I've seen other posts with the same error message. Apparently the issue (from reading other posts) is due to lack of support for this particular Linux OS.

    Does anyone know of a list of supported Linux OS's which I can use instead? Perhaps in earlier version of Fedora?

    Thanks.

    Parallels Tools 5.0.9376.599993 Installer started.
    2010-09-10T17:02:29-0400: execCmd: ./installer/pm.sh check_guest_tools 2>&1 [0]

    Fri Sep 10 17:02:29 EDT 2010
    Start installation or upgrade of Guest Tools
    Found Guest Tools directory: /usr/lib/parallels-tools
    Start removal of user space modules
    head: cannot open `/usr/lib/parallels-tools/.backup/.psf' for reading: No such file or directory
    sed: -e expression #1, char 0: no previous regular expression
    Cannot umount ""

    rmdir: failed to remove `': No such file or directory
    grep: /usr/lib/parallels-tools/.backup/.psf: No such file or directory
    ls: cannot access /usr/lib/parallels-tools/.backup/.libgl: No such file or directory
    Removing of X server configuration is skipped.
    Removal of user space applications and drivers was finished successfully
    Start removal of prl_eth kernel module
    Kernel module prl_eth was unloaded
    Start removal of prl_tg kernel module
    Kernel module prl_tg was unloaded
    Start removal of prl_fs kernel module
    Error: could not unload prl_fs kernel module
    Start removal of prl_fs_freeze kernel module
    Error: could not unload prl_fs_freeze kernel module
    Remove kernel modules according to /usr/lib/parallels-tools/.backup/.kmods.list file
    DKMS modules were removed successfully
    Removal of kernel modules was finished successfully
    Register service to install new Guest Tools
    Perform installation into the /usr/lib/parallels-tools directory
    Start installation of prl_eth kernel module
    make: Entering directory `/usr/lib/parallels-tools/kmods'
    cd prl_eth/pvmnet && make
    make[1]: Entering directory `/usr/lib/parallels-tools/kmods/prl_eth/pvmnet'
    make -C /lib/modules/2.6.33.3-85.fc13.x86_64/build M=/usr/lib/parallels-tools/kmods/prl_eth/pvmnet
    make[2]: Entering directory `/usr/src/kernels/2.6.33.3-85.fc13.x86_64'
    LD /usr/lib/parallels-tools/kmods/prl_eth/pvmnet/built-in.o
    CC [M] /usr/lib/parallels-tools/kmods/prl_eth/pvmnet/pvmnet.o
    LD [M] /usr/lib/parallels-tools/kmods/prl_eth/pvmnet/prl_eth.o
    Building modules, stage 2.
    MODPOST 1 modules
    WARNING: modpost: missing MODULE_LICENSE() in /usr/lib/parallels-tools/kmods/prl_eth/pvmnet/prl_eth.o
    see include/linux/module.h for more information
    CC /usr/lib/parallels-tools/kmods/prl_eth/pvmnet/prl_eth.mod.o
    LD [M] /usr/lib/parallels-tools/kmods/prl_eth/pvmnet/prl_eth.ko
    make[2]: Leaving directory `/usr/src/kernels/2.6.33.3-85.fc13.x86_64'
    make[1]: Leaving directory `/usr/lib/parallels-tools/kmods/prl_eth/pvmnet'
    cd prl_tg/Toolgate/Guest/Linux/prl_tg && make
    make[1]: Entering directory `/usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg'
    make -C /lib/modules/2.6.33.3-85.fc13.x86_64/build SUBDIRS=/usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg SRCROOT=/usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg modules
    make[2]: Entering directory `/usr/src/kernels/2.6.33.3-85.fc13.x86_64'
    CC [M] /usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prltg.o
    /usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prltg.c: In function ‘replace_buffer’:
    /usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prltg.c:753: warning: cast to pointer from integer of different size
    /usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prltg.c: In function ‘prl_vtg_ioctl’:
    /usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prltg.c:856: warning: cast to pointer from integer of different size
    /usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prltg.c:905: warning: cast to pointer from integer of different size
    LD [M] /usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prl_tg.o
    Building modules, stage 2.
    MODPOST 1 modules
    WARNING: modpost: missing MODULE_LICENSE() in /usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prl_tg.o
    see include/linux/module.h for more information
    WARNING: modpost: Found 3 section mismatch(es).
    To see full details build your kernel with:
    'make CONFIG_DEBUG_SECTION_MISMATCH=y'
    CC /usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prl_tg.mod.o
    LD [M] /usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg/prl_tg.ko
    make[2]: Leaving directory `/usr/src/kernels/2.6.33.3-85.fc13.x86_64'
    make[1]: Leaving directory `/usr/lib/parallels-tools/kmods/prl_tg/Toolgate/Guest/Linux/prl_tg'
    cp -f prl_tg/Toolgate/Guest/Linux/prl_tg/*.symvers prl_fs/SharedFolders/Guest/Linux/prl_fs ||:
    cd prl_fs/SharedFolders/Guest/Linux/prl_fs && make
    make[1]: Entering directory `/usr/lib/parallels-tools/kmods/prl_fs/SharedFolders/Guest/Linux/prl_fs'
    make -C /lib/modules/2.6.33.3-85.fc13.x86_64/build M=/usr/lib/parallels-tools/kmods/prl_fs/SharedFolders/Guest/Linux/prl_fs
    make[2]: Entering directory `/usr/src/kernels/2.6.33.3-85.fc13.x86_64'
    LD /usr/lib/parallels-tools/kmods/prl_fs/SharedFolders/Guest/Linux/prl_fs/built-in.o
    CC [M] /usr/lib/parallels-tools/kmods/prl_fs/SharedFolders/Guest/Linux/prl_fs/super.o
    CC [M] /usr/lib/parallels-tools/kmods/prl_fs/SharedFolders/Guest/Linux/prl_fs/inode.o
    CC [M] /usr/lib/parallels-tools/kmods/prl_fs/SharedFolders/Guest/Linux/prl_fs/file.o
    CC [M] /usr/lib/parallels-tools/kmods/prl_fs/SharedFolders/Guest/Linux/prl_fs/interface.o
    LD [M] /usr/lib/parallels-tools/kmods/prl_fs/SharedFolders/Guest/Linux/prl_fs/prl_fs.o
    Building modules, stage 2.
    MODPOST 1 modules
    WARNING: modpost: missing MODULE_LICENSE() in /usr/lib/parallels-tools/kmods/prl_fs/SharedFolders/Guest/Linux/prl_fs/prl_fs.o
    see include/linux/module.h for more information
    CC /usr/lib/parallels-tools/kmods/prl_fs/SharedFolders/Guest/Linux/prl_fs/prl_fs.mod.o
    LD [M] /usr/lib/parallels-tools/kmods/prl_fs/SharedFolders/Guest/Linux/prl_fs/prl_fs.ko
    make[2]: Leaving directory `/usr/src/kernels/2.6.33.3-85.fc13.x86_64'
    make[1]: Leaving directory `/usr/lib/parallels-tools/kmods/prl_fs/SharedFolders/Guest/Linux/prl_fs'
    cd prl_fs_freeze/Snapshot/Guest/Linux/prl_freeze && make
    make[1]: Entering directory `/usr/lib/parallels-tools/kmods/prl_fs_freeze/Snapshot/Guest/Linux/prl_freeze'
    make -C /lib/modules/2.6.33.3-85.fc13.x86_64/build M=/usr/lib/parallels-tools/kmods/prl_fs_freeze/Snapshot/Guest/Linux/prl_freeze modules
    make[2]: Entering directory `/usr/src/kernels/2.6.33.3-85.fc13.x86_64'
    CC [M] /usr/lib/parallels-tools/kmods/prl_fs_freeze/Snapshot/Guest/Linux/prl_freeze/prl_fs_freeze.o
    Building modules, stage 2.
    MODPOST 1 modules
    WARNING: modpost: missing MODULE_LICENSE() in /usr/lib/parallels-tools/kmods/prl_fs_freeze/Snapshot/Guest/Linux/prl_freeze/prl_fs_freeze.o
    see include/linux/module.h for more information
    CC /usr/lib/parallels-tools/kmods/prl_fs_freeze/Snapshot/Guest/Linux/prl_freeze/prl_fs_freeze.mod.o
    LD [M] /usr/lib/parallels-tools/kmods/prl_fs_freeze/Snapshot/Guest/Linux/prl_freeze/prl_fs_freeze.ko
    make[2]: Leaving directory `/usr/src/kernels/2.6.33.3-85.fc13.x86_64'
    make[1]: Leaving directory `/usr/lib/parallels-tools/kmods/prl_fs_freeze/Snapshot/Guest/Linux/prl_freeze'
    make: Leaving directory `/usr/lib/parallels-tools/kmods'
    Start installation of prl_tg kernel module
    Start installation of prl_fs kernel module
    Start installation of prl_fs_freeze kernel module
    DKMS modules were added successfully
    DKMS modules were built successfully
    DKMS modules were installed successfully
    Installation of kernel modules was finished successfully
    /etc/modprobe.conf is missing
    Start installation of user space modules
    X server: xorg, v1.8.0
    Install X modules from directory: .1.8
    System X modules are placed in /usr/lib64/xorg/modules
    Error: there is no X modules for this version of X server
    Error: failed to install user space applications and drivers
    2010-09-10T17:02:58-0400: execCmd: ./install --install [165]
    2010-09-10T17:02:58-0400: Error: An error occurred when installing Parallels Tools. Please go to /var/log/parallels-tools-install.log for more information.
     
  2. joevt

    joevt Forum Maven

    Messages:
    1,207
    The version of Parallels Tools that comes with Parallels Desktop 6 works with Fedora 13.
     
  3. pidepiper

    pidepiper Bit poster

    Messages:
    2
    Thanks - I just paid to upgrade to Parallels 5 yesterday. And hours after I bought it they announced Parallels 6. Let's hope they give me a free upgrade to 6 as I've not even installed 5 fully yet!
     
    Last edited: Sep 11, 2010
  4. joevt

    joevt Forum Maven

    Messages:
    1,207
  5. Jason Cutler

    Jason Cutler Junior Member

    Messages:
    11

Share This Page